|
ИСТИНА |
Войти в систему Регистрация |
ИСТИНА ЦЭМИ РАН |
||
CO2 stripping from ionic liquid at elevated pressures in gas-liquid membrane contactorстатья
Информация о цитировании статьи получена из
Web of Science,
Scopus
Статья опубликована в журнале из списка Web of Science и/или Scopus
Дата последнего поиска статьи во внешних источниках: 24 апреля 2018 г.
- Авторы: Bazhenov Stepan, Malakhov Alexander, Bakhtin Danila, Khotimskiy Valery, Bondarenko Galina, Volkov Vladimir, Ramdin Mahinder, Vlugt Thijs J.H., Volkov Alexey
- Журнал: International Journal of Greenhouse Gas Control
- Том: 71
- Год издания: 2018
- Издательство: Elsevier BV
- Местоположение издательства: Netherlands
- Первая страница: 293
- Последняя страница: 302
- DOI: 10.1016/j.ijggc.2018.03.001
- Аннотация: In this study, the gas-liquid membrane contactor was considered for regeneration of the room-temperature ionic liquids (RTIL) that can be used as physical solvents for carbon dioxide capture process at elevated pressures. Poly[1-(trimethylsilyl)-1-propyne] (PTMSP) was selected as a membrane material due to its high mass transport characteristics and good mechanical properties. Nine different RTILs, such as [Emim][DCA], [Emim][BF4], [Emim][DEP], [Bmim][BF4], [Bmim][Tf2N], [Hmim][TCB], [P66614][DCA], [P66614][Br] and [P66614][Phos], were used to evaluate the solvent-membrane compatibility. The long-term sorption tests (40+ days) revealed that the solvent-membrane interaction is mainly determined by the liquid surface tension regardless of viscosity and molecular size of RTILs. For instance, [Emim][BF4] and [Emim][DCA], having the surface tension of 60.3 and 54.0 mN/m, demonstrated a very low affinity to the bulk material of PTMSP (sorption as low as 0.02 g/g; no swelling); while for the next ionic liquid [Bmim][BF4] with surface tension of 44.4 mN/m, the sorption and swelling of PTMSP was 0.79 g/g and 21%, respectively. The long-term RTIL permeation test (Δp = 40 bar, T = 50°С, t > 400 h) confirmed that there is no hydrodynamic flow through PTMSP for [Emim][DCA] and [Emim][BF4]. The concept of CO2 stripping from RTIL with the membrane contactor by the pressure (Δp = 10 bar) and temperature (ΔT = 20 °С) swing was proved by using dense PTMSP membrane and [Emim][BF4]. The overall mass transfer coefficient value was equal to (1.6 − 3.8) × 10−3 cm/s with respect to liquid flow rate. By using the resistance-in-series model, it was shown that the membrane resistance contribution to the gas transfer was estimated to be approximately 8%.
- Добавил в систему: Бахтин Данила Станиславович